Nails, rings and keys
Door-handle cup film
Protects the paint behind the door handles, the spot most likely to be scratched by fingernails, rings or car keys. Shaped to fit each make and model.
500–1,000 THB · depending on the number of doors
CLEAR GUARD DIY
DIY protectionfilm kits
Stop the marks that build up from everyday use, like fingernail scratches, key scrapes and scuffs from getting in and out, with the same 225 micron TPU film as Clear Guard ELITE, applied yourself.
Four kits for door-handle cups, charging or fuel covers, door sills and door edges, 400–1,500 THB.
- ELITE-grade TPU 225 micron
- Heat-activated self-healing
- No installer needed
- Wash as usual
DIY KITS
Choose a kit for the spot you want to protect
The small spots you touch most are the ones that scratch most easily. Every kit uses the same 225 micron TPU film as Clear Guard ELITE, and you can apply it yourself.
EVs and petrol cars
Door handle and charging/fuel cover film
Protects the paint around the charging port cover and door handles on an EV, or the fuel cover on a petrol car.
1,000–1,500 THB
Scuffs from getting in and out
Door sill / tailgate sill film
Protects the paint on the door sills or the tailgate sill, where it gets scuffed as people get in and out of the car. Each box holds two 7 × 100 cm strips that you cut to size for any car, plus a microfiber cloth and application gel.
400 THB
View this kit on Shopee (opens in a new tab)
Fits any make or model
Door edge film
Protects the paint along the door edges. Each box holds four 2 × 150 cm strips that you cut to length and can apply dry; if a strip goes on wrong, peel it off and reapply.
400 THB
View this kit on Shopee (opens in a new tab)Check your car model before ordering
The door-handle and charging or fuel cover kits are designed for specific car models. Send your car’s make, model and year so the team can confirm there is a kit for your car before you order. The door-sill and door-edge strips fit any car.
EASY TO APPLY
Easy to apply, easy to care for
The same film as Clear Guard ELITE
TPU film 225 micron thick that heals with heat and is clear enough that the film is hard to spot.
Dry or wet, by size
Small pieces such as the door edges can go on dry. For larger pieces, apply wet: a thin layer of clear gel or soapy water on the adhesive side, then squeegee the bubbles out, because dry application over a large area can trap air bubbles.
Made to fit, easy to apply
The door-handle and charging or fuel cover kits are cut to your car model; the door-sill and door-edge strips are cut to size and fit any car.
Easy care
After application, clean and wash the car as usual.
DIY OR INSTALLER
Apply it yourself, or have it installed?
DIY kits suit the small touch points. For larger areas such as the hood or bumpers, use the dealer installation service.
DIY
DIY protection kits
- Small touch points: door-handle cups, charging or fuel covers, door sills, door edges
- The same 225 micron TPU film as the ELITE grade, applied yourself
- 400–1,500 THB, sold on Shopee
PARTIAL
Installed partial protection
- Larger areas: hood, bumpers, front fenders, headlights
- Installed by a dealer in PRO or ELITE grade, with a warranty
- From 3,000 THB per piece
FIELD PROOF
See it on real cars
FAQ
DIY protection kit FAQ
What film do the DIY kits use?
The same film as Clear Guard ELITE: TPU 225 micron thick with a heat-activated self-healing surface. Swirl marks and light scratches recover when the film reaches about 50–70 °C, which the Thai sun provides.
Which car models do the DIY kits fit?
The door-handle and charging or fuel cover kits are designed for specific car models: before ordering, send your car’s make, model and year on LINE and the team will check. The door-sill and door-edge strips are cut to size and fit any make or model.
Should I apply the film dry or wet?
Small pieces such as the door edges can go on dry. For larger pieces such as the door sills, apply wet: spread a thin layer of clear gel or soapy water on the adhesive side, lay the film on, then squeegee out the gel and all the air bubbles, because dry application over a large area can trap air bubbles. No skilled installer is needed, and if a piece goes on wrong you can peel it off and reapply.
How much do the DIY kits cost?
Door-handle cup film 500–1,000 THB (depending on the number of doors); Door handle and charging/fuel cover film 1,000–1,500 THB; Door sill / tailgate sill film 400 THB; Door edge film 400 THB. Sold on Shopee.
Can I wash the car after applying the film?
Yes. After application, clean and wash the car as usual.
What if I want to protect a larger area?
For the hood, bumpers, front fenders or headlights, use the installed partial protection service in PRO or ELITE grade, from 3,000 THB per piece including installation and warranty.
ORDER
Ready to order? Check your car model first
Send your car’s make, model and year on LINE so the team can confirm the right kit, then order on Shopee (the door-sill and door-edge strips fit any car), 400–1,500 THB.